Latest News

Reusable K&N air filter, number 33-3028, is designed to fit many 2012, 2013, 2014, 2015 and 2016 BMW advanced 3.0L diesel models, including the 335D, 740D, and X5 35D

Performance, fuel-efficiency, and lower emissions make it is easy to love BMW’s advanced diesel technology. For years the global market has known about the fuel-efficiency advantage diesel engines have to offer. Yet, diesels engines have held the reputation of being slow and dirty. BMW, and several other manufacturers, have made it their goal to change that notion. BMW’s 3.0-liter twin-turbo advanced diesel engine is capable of accelerating nearly as fast as its gasoline / petrol engine counterparts with considerably lower fuel consumption helping to offset the difference in performance.

The BMW 3.0L twin-turbo advanced diesel engine is capable of accelerating nearly as fast as its gasoline / petrol counterparts with lower fuel consumption to offset the difference in performance

Owners of many 2012, 2013, 2014, 2015 and 2016 BMW advanced 3.0-liter diesel models, such as the 330D, 535D, and X6 30D can equip their car or crossover SUV with a replacement diesel air filter from the authority in washable air filters, K&N. This reusable air filter, number 33-3028, is designed to fit into the stock air filter box many 2012, 2013, 2014, 2015 and 2016 BMW advanced 3.0L diesel models, including the 335D, 740D, and X5 35D without any need for modifications. K&N replacement air filters are made with specially woven cotton gauze. Because cotton, by nature, is more breathable than paper, a K&N replacement diesel air filter can flow more air than a typical paper air filter. More air can result in better acceleration and improved throttle response.

A K&N replacement diesel air filter can flow more air than a typical paper air filter which can result in better acceleration and improved throttle response

K&N air filter designers place filtration efficiency and dirt retention as a priority when developing a replacement diesel air filter. 2012-2016 BMW 3.0L diesel air filter 33-3028 uses design elements, such as extra deep pleats and extra layers of cotton gauze which take this air filter above and beyond our standard gasoline / petrol engine replacement air filters. K&N filtration efficiency test results, following the internationally recognized ISO 5011 protocol with ISO coarse test dust, show that the 2012-2016 BMW 3.0L diesel air filter, number 33-3028, is 99.24% efficient overall.

The special K&N cotton air filter media of K&N replacement diesel air filter 33-3028 allows this air filter to be a washable and reusable air filter. The ability to wash and reuse a K&N air filter means that it will pay for itself over time. K&N oiled cotton air filters can be washed and made like new using a readily available K&N Recharger air filter service kit. Please visit the K&N Air Filter Cleaner & Filter Cleaning Accessories page on KNfilters.com to view available air filter cleaner and oil products.

K&N backs its replacement automotive and light duty truck diesel air filters with a 10-year / Million Mile Limited Warranty (1.6 million kilometres). Replacement air filter 33-3028 is designed to provide increased performance, reusability, and long air filter service intervals without any need for modifications or tuning for the following 2012, 2013, 2014, 2015 and 2016 BMW advanced diesel 3.0L models:

2012-2016 BMW 3.0L diesel air filter, number 33-3028, uses design elements, such as extra deep pleats and extra layers of cotton gauze to be rated 99.24% efficient overall

2016 BMW X6 XDrive 30D 3.0L L6 Diesel
2016 BMW X6 M50D 3.0L L6 Diesel
2016 BMW X5 XDrive40D 3.0L L6 Diesel
2016 BMW X5 XDrive35D 3.0L L6 Diesel
2016 BMW X5 XDrive30D 3.0L L6 Diesel
2016 BMW X5 M50D 3.0L L6 Diesel
2016 BMW X4 3.0L L6 Diesel
2016 BMW X3 XDrive 35D 3.0L L6 Diesel
2016 BMW X3 XDrive 30D 3.0L L6 Diesel
2016 BMW M550D 3.0L L6 Diesel
2016 BMW 750D 3.0L L6 Diesel
2016 BMW 740LD XDrive 3.0L L6 Diesel
2016 BMW 740D 3.0L L6 Diesel
2016 BMW 730D 3.0L L6 Diesel
2016 BMW 640D Grand Coupe 3.0L L6 Diesel
2016 BMW 640D 3.0L L6 Diesel
2016 BMW 535D XDrive 3.0L L6 Diesel
2016 BMW 535D GT 3.0L L6 Diesel
2016 BMW 535D 3.0L L6 Diesel
2016 BMW 530D GT 3.0L L6 Diesel
2016 BMW 530D 3.0L L6 Diesel
2016 BMW 435D 3.0L L6 Diesel
2016 BMW 430D 3.0L L6 Diesel
2016 BMW 335D GT 3.0L L6 Diesel
2016 BMW 335D 3.0L L6 Diesel
2016 BMW 330D GT 3.0L L6 Diesel
2016 BMW 330D 3.0L L6 Diesel
2015 BMW X6 XDrive 30D 3.0L L6 Diesel
2015 BMW X6 M50D 3.0L L6 Diesel
2015 BMW X5 XDrive40D 3.0L L6 Diesel
2015 BMW X5 XDrive35D 3.0L L6 Diesel
2015 BMW X5 XDrive30D 3.0L L6 Diesel
2015 BMW X5 M50D 3.0L L6 Diesel
2015 BMW X4 3.0L L6 Diesel
2015 BMW X3 XDrive 35D 3.0L L6 Diesel
2015 BMW X3 XDrive 30D 3.0L L6 Diesel
2015 BMW M550D 3.0L L6 Diesel
2015 BMW 750D 3.0L L6 Diesel
2015 BMW 740LD XDrive 3.0L L6 Diesel
2015 BMW 740D 3.0L L6 Diesel
2015 BMW 730D 3.0L L6 Diesel
2015 BMW 640D Grand Coupe 3.0L L6 Diesel
2015 BMW 640D 3.0L L6 Diesel
2015 BMW 535D XDrive 3.0L L6 Diesel
2015 BMW 535D GT 3.0L L6 Diesel
2015 BMW 535D 3.0L L6 Diesel
2015 BMW 530D GT 3.0L L6 Diesel
2015 BMW 530D 3.0L L6 Diesel
2015 BMW 435D 3.0L L6 Diesel
2015 BMW 430D 3.0L L6 Diesel
2015 BMW 335D GT 3.0L L6 Diesel
2015 BMW 335D 3.0L L6 Diesel
2015 BMW 330D GT 3.0L L6 Diesel
2015 BMW 330D 3.0L L6 Diesel
2014 BMW X6 XDrive 30D 3.0L L6 Diesel
2014 BMW X6 M50D 3.0L L6 Diesel
2014 BMW X5 XDrive40D 3.0L L6 Diesel
2014 BMW X5 XDrive35D 3.0L L6 Diesel
2014 BMW X5 XDrive30D 3.0L L6 Diesel
2014 BMW X5 M50D 3.0L L6 Diesel
2014 BMW X4 3.0L L6 Diesel
2014 BMW X3 XDrive 35D 3.0L L6 Diesel
2014 BMW X3 XDrive 30D 3.0L L6 Diesel
2014 BMW M550D 3.0L L6 Diesel
2014 BMW 750D 3.0L L6 Diesel
2014 BMW 740D 3.0L L6 Diesel
2014 BMW 730D 3.0L L6 Diesel
2014 BMW 640D Grand Coupe 3.0L L6 Diesel
2014 BMW 640D 3.0L L6 Diesel
2014 BMW 535D XDrive 3.0L L6 Diesel
2014 BMW 535D GT 3.0L L6 Diesel
2014 BMW 535D 3.0L L6 Diesel
2014 BMW 530D GT 3.0L L6 Diesel
2014 BMW 530D 3.0L L6 Diesel
2014 BMW 435D 3.0L L6 Diesel
2014 BMW 430D 3.0L L6 Diesel
2014 BMW 335D GT 3.0L L6 Diesel
2014 BMW 335D 3.0L L6 Diesel
2014 BMW 330D GT 3.0L L6 Diesel
2014 BMW 330D 3.0L L6 Diesel
2013 BMW X6 M50D 3.0L L6 Diesel
2013 BMW X5 XDrive40D 3.0L L6 Diesel
2013 BMW X5 XDrive30D 3.0L L6 Diesel
2013 BMW X5 M50D 3.0L L6 Diesel
2013 BMW X3 XDrive 35D 3.0L L6 Diesel
2013 BMW X3 XDrive 30D 3.0L L6 Diesel
2013 BMW M550D 3.0L L6 Diesel
2013 BMW 750D 3.0L L6 Diesel
2013 BMW 740D 3.0L L6 Diesel
2013 BMW 730D 3.0L L6 Diesel
2013 BMW 640D Grand Coupe 3.0L L6 Diesel
2013 BMW 640D 3.0L L6 Diesel
2013 BMW 535D GT 3.0L L6 Diesel
2013 BMW 535D 3.0L L6 Diesel
2013 BMW 530D GT 3.0L L6 Diesel
2013 BMW 530D 3.0L L6 Diesel
2013 BMW 435D 3.0L L6 Diesel
2013 BMW 430D 3.0L L6 Diesel
2013 BMW 335D 3.0L L6 Diesel
2013 BMW 330D 3.0L L6 Diesel
2012 BMW X6 M50D 3.0L L6 Diesel
| 2012 BMW X5 M50D 3.0L L6 Diesel
2012 BMW X3 XDrive 35D 3.0L L6 Diesel
2012 BMW X3 XDrive 30D 3.0L L6 Diesel
2012 BMW M550D 3.0L L6 Diesel
2012 BMW 750D 3.0L L6 Diesel
2012 BMW 740D 3.0L L6 Diesel
2012 BMW 730D 3.0L L6 Diesel
2012 BMW 640D Grand Coupe 3.0L L6 Diesel
2012 BMW 640D 3.0L L6 Diesel
2012 BMW 535D GT 3.0L L6 Diesel
2012 BMW 535D 3.0L L6 Diesel
2012 BMW 530D GT 3.0L L6 Diesel
2012 BMW 530D 3.0L L6 Diesel
2012 BMW 335D 3.0L L6 Diesel - F30/F31
2012 BMW 330D 3.0L L6 Diesel - F30/F31
2011 BMW X3 XDrive 35D 3.0L L6 Diesel
2011 BMW X3 XDrive 30D 3.0L L6 Diesel
2011 BMW 730D 3.0L L6 Diesel
2011 BMW 640D 3.0L L6 Diesel
2011 BMW 535D 3.0L L6 Diesel
2011 BMW 530D 3.0L L6 Diesel

K&N diesel air filter 33-3028 is designed as a direct air filter cross reference for the following part numbers:

1A First A63646
Alco MD8748
BMW 13718518111
Comline EAF888
Coopers PA7789
Fiaam PA7789
Fram CA11708
Muller PA3646
Purflux A1580
Vaico V202067

Additional BMW performance upgrades or K&N products for other vehicles can be found using the Vehicle Search Tool. To find a K&N dealer in almost any part of the world, use Search for K&N Dealer.

The Project 156 motorcycle is a hand-built road-racing bike with a prototype Victory v-twin engine developed at Victory’s Minnesota research and development facility

The Pike’s Peak International Hill Climb, also known as the Race to the Clouds, is an annual automobile and motorcycle hill climb to the summit of Pike’s Peak, Colorado which will take place on June 28, 2015. Having started in 1916, it is the second-oldest motorsport event in America after the Indianapolis 500. The track measures 12.42 miles (19.99 km) over 156 turns, climbing 4,720 feet (1,440 m) from the start at Mile 7 on Pike’s Peak Highway, to the finish at 14,110 feet (4,300 m), on grades averaging 7 percent.

American motorcycle manufacturer Victory Motorcycles, in partnership with custom bike builder Roland Sands of Roland Sands Design and Cycle World Magazine, plan to race a new prototype engine at the Pike’s Peak International Hill Climb. The prototype racing motorcycle, named Project 156 for the 156 turns in the Pike’s Peak International Hill Climb, will feature a liquid-cooled American V-Twin engine and be piloted by Cycle World Road Test Editor Don Canet.

A liquid-cooled v-twin engine represents the future of performance for Victory and features twin 67mm intake throttle bodies with downdraft runners as well as a performance valve train

“We have an intense focus at Victory Motorcycles to prove the performance of our vehicles,” said Rod Krois, Victory General Manager. “Competing as an American OEM at America’s race is an exciting opportunity. The grueling conditions at Pike’s Peak provide the perfect proving ground for our new Project 156 race engine.”

The Roland Sands Design team developed and built the chassis to cradle the Project 156 motor to race the 2015 Pike’s Peak International Hill Climb, also known as the Race to the Clouds

The Project 156 motorcycle is a hand-built road-racing bike with a prototype Victory v-twin engine developed at Victory’s Minnesota research and development facility. This liquid-cooled engine represents the future of performance for the Victory brand. It features twin 67mm intake throttle bodies with downdraft runners for maximum power and torque as well as a performance valve train with titanium intake and exhaust valves for maximum revolutions per minute (RPM).

The Roland Sands Design team developed and built a chassis to cradle the Project 156 motor. “This truly has been an All-American effort,” said Roland Sands. “The Race to the Clouds is a legendary event and we couldn’t be more proud to partner with Victory on the endeavor. We’ve built lots of custom motorcycles, but building a purpose-built race bike for this project has been a unique experience that we’ll remember for a long time.”

Roland Sands reached out to K&N air filters to design and build a custom air filter box and fuel tank that would complement the prototype engine, hand built frame, and twin throttle bodies

Roland Sands reached out to K&N air filters to design and build a custom air filter box and fuel tank that would complement the prototype engine, hand built frame, and twin 67mm intake throttle bodies with downdraft runners. The advanced composite technology used in carbon fiber reinforced polymer, commonly referred to as carbon fiber, results in an incredible strength to weight ratio. The use of carbon fiber is ideal for applications that require strength, lightness and stiffness. K&N filters has an on-site composite department which builds hand-laid carbon fiber components ranging from air filter bases to custom dragster air scoops and racing air boxes.

K&N filters has an on-site composite department which builds hand-laid carbon fiber components ranging from air filter top plates to custom dragster air scoops and racing air boxes

John Jump, Powersports Brand Manager for K&N Engineering, Inc., said “Our involvement with the RSD Victory Motorcycles Project 156 draws from a relationship established several years back. Not only have we been involved with Roland Sands and many of his project builds through the years, we also have had a long lasting relationship with Falkner-Livingston with proven success at the Pikes Peak International Hill Climb. This time Don Canet, the pilot of Project 156, will get the honor of pushing this bike to its limits and into the clouds. K&N supports many racers who compete at the mountain, but our involvement and development of the carbon fiber parts that went into this bike, as well as our collaboration with the builder, team and rider will make 2015 the most exciting year to date.”

Cycle World Road Test Editor, Don Canet, has anxiously awaited his chance to throw a leg over Project 156 for some seat time in preparation of his second Pike’s Peak Hill Climb

Cycle World Road Test Editor, Don Canet, has anxiously awaited his chance to throw a leg over Project 156 for some seat time. “Ever since Victory and Roland Sands introduced me to this project I’ve been counting down the days to the event,” said Cycle World Road Test Editor Don Canet. “This will be my second time racing the Pike’s Peak International Hill Climb. Now that I’ve had a taste of what it’s like I’m ready to get back and finish stronger in 2015.”

Unfortunately, the Victory Motorcycles Project 156 suffered a setback on Saturday June 13th in a practice accident on the Pikes Peak race course. Don Canet did not suffer any serious injuries, and was immediately up from the crash, however the motorcycle was damaged enough to require a complete strip-down and frame straightening. “As I was going up the mountain I lost the front end under braking, asphalt temperature was extremely low and, counter-intuitively, I think the tire was getting colder as the run went on,” said Canet.

The Falkner-Livingston team transported the race bike back to the Roland Sands Designs headquarters in Southern California for evaluation. “Not going to lie…” said RSD project leader Cameron Brewer, “Project 156 is really beat up. But we are racers at heart and I can promise Victory Motorcycles, Cycle World Magazine, RSD and Pikes Peak fans that we will rebuild the bike – she took one hell of a hit, but we are committed to this program.”

Don Canet’s crash during Pikes Peak testing only adds further testament to the unpredictable nature and ever changing conditions of the Race to the Clouds. With such an extreme ascent up the mountain and Colorado’s always changing weather conditions the Pike’s Peak International Hill Climb is never short on thrills. It will be interesting to watch as the Roland Sands Design team scrambles to get Project 156 back in one piece and see how Don will perform come race day.

K&N sponsored Jonathan Allard and the Tri-C Motorsports team worked all week to get a new car finished before Friday night at Silver Dollar Speedway in Chico, California

K&N^® sponsored Jonathan Allard and the Tri-C Motorsports team worked all week to get a new car finished before Friday night at Silver Dollar Speedway in Chico, California. Allard got his weekend kicked off on Friday night by timing the Tri-C Manufacturing/K&N/ButlerBuilt No. 3c machine in second fastest during qualifying time trials. Allard lined up in the second row of his heat race and kept his elbows up as he powered his way into the lead for the win. With his finish in the heat, Allard earned himself a spot in the feature even redraw.

Pulling the six, Jonathan Allard lined the K&N filters equipped Amerikote/King Racing Products/BR Motorsports backed No. 3c machine in the third row for the 25-lap feature event. From his third row starting position, Allard was quick to work his way forward, as he reeled in Andy Forsberg on the fourth lap, and made his move exiting turn four to complete lap five. Once out in front, Allard flexed his muscle and set sail on the field as he was flawless out front and picked up his third win of the season in the United States. “It was a long week, but it was great to come out of the gate and pick up a win,” Allard said.

Jonathan Allard got his weekend kicked off on Friday night by timing the Tri-C Manufacturing/K&N/ButlerBuilt No. 3c machine in second fastest during qualifying time trials

The K&N supported Tri-C Motorsports team packed up and headed to Stockton, California the following night for the King of the West Series. Jonathan Allard got his night started by timing in 11th fastest. Lining up on the front row of his heat race, Allard got the jump and picked up the win and also advanced to the night’s dash. Allard started on the front row of the dash eventually finishing second and securing a front row starting spot for the 30-lap feature event. As the feature event went green, Allard, Bud Kaeding, and Tyler Walker battled for the top spot down the front stretch.

From the third row, Jonathan Allard was quick to work his way forward; once out front, Allard flexed his muscle and set sail on the field as he was flawless out front and picked up the win

Getting into turn one, a car got a bit out of control in front of Allard, and as he took action to avoid contact, Allard flipped his race car upside-down. The K&N sponsored Tri-C Motorsports crew worked feverishly in the pit area to make the restart. Unfortunately Allard had to restart from the tail end of the field. Working hard to move forward in the pack, Allard made it back inside the Top-10, only to see a part fail on the 19th lap, and bring his night to an early end. “It was shaping up to be a very good weekend for this team and I hate to see it end like it did with a crash and some tore up parts,” Allard said. “We have all been working hard, and it was good to get back into victory lane on Friday night.”

Jonathan Allard would like to thank Tri-C Manufacturing, K&N, ButlerBuilt, Amerikote, King Racing Products, BR Motorsports, Red Line Oil, KSE Racing Products, Weld Wheels, NGK Spark Plugs, FK Rod Ends, Hunt Magnetos, Longacre Products, RCM Design, Ti64, A.R.T. Speed Equipment, AL Driveline, and Hoosier Tire for their support. Allard will be back at the Silver Dollar Speedway on Friday nights for weekly point racing before heading to the Stockton Dirt Track with the King of the West Series.

K&N replacement air filter, number E-0662, for 2012-2015 Ford Ranger 2.2L Duratorq L4 diesel, 2.5L L4 petrol, or the 3.2L Duratorq engines and 2012-2016 Mazda BT50 2.2L and 3.2L engines

The Ford Ranger was once the most popular compact truck in the United States. The Ranger held this title for 17 of the 30 years it was sold in North America. Unfortunately, declining sales in the compact truck market and improved fuel efficiency for the Ford F-150, led Ford to discontinue the North American Ranger in 2012. At the same time, Ford introduced a new global Ford Ranger that is larger in size than the outgoing platform and includes several diesel engine options in addition to the fuel efficient Mazda-derived 2.5L L4 engine.

Using ISO Coarse dust, 22% of which is around the size of a human blood cell, K&N replacement air filter E-0662 was rated at 99.04% efficient overall

Codenamed the T6, the global market Ford Ranger is sold in 180 countries, including the Middle East, Mexico, and South America. Owners of 2012 to 2015 Ford Ranger models, not including the 2012 Ford Ranger sold in the U.S. or Canada, can upgrade the performance of their mid-size pickup truck with the superior airflow and superior performance of a K&N replacement air filter. K&N replacement air filter E-0662 will fit 2012, 2013, 2014, and 2015 Ford Ranger models with the 2.2L Duratorq L4 diesel, 2.5L L4 petrol engine, or the 3.2L Duratorq inline-five cylinder diesel engine. This air filter is designed as a simple drop-in performance upgrade without any need for further modifications.

The K&N replacement air filter for 2012-2015 Ford Ranger 2.2L, 2.5L, or 3.2L models and 2012-2016 Mazda BT50 2.2L and 3.2L diesel trucks has been designed and tested to withstand the harsh environments that a Ford Ranger might be subjected to. Taking filtration one step further, K&N replacement air filter E-0662 is made with 4-layers of K&N’s special tight weave premium cotton gauze. Following internationally recognized ISO 5011 testing protocol, K&N has performed in-house filtration testing to ensure that this air filter will provide increased airflow without sacrificing filtration efficiency. Using ISO Coarse dust, 22% of which is around the size of a human blood cell, K&N replacement air filter E-0662 was rated at 99.04% efficient overall.

Most K&N replacement air filters, including the 2012-2015 Ford Ranger and 2012-2016 Mazda BT50 air filter, are hand-made in the United States. K&N air filters are covered by a 10-year/million mile limited warranty, or 1.6 million kilometers, to ensure 2012-2015 Ford Ranger and 2012-2016 Mazda BT50 owners are buying the World’s best air filter. K&N replacement air filters are easy to wash and return to service using one of the many K&N air filter cleaning products available.

Buying K&N replacement air filter, number E-0662, is one of the easiest upgrades owners of the following Ford Ranger pickup trucks can make:

2018 Ford Ranger 3.2L L5 Diesel Engine
2017 Ford Ranger 3.2L L5 Diesel Engine
2017 Ford Ranger 2.2L L4 Diesel Engine
2016 Mazda BT50 3.2L L5 Diesel Engine
2016 Mazda BT50 2.2L L4 Diesel Engine
2016 Ford Ranger 3.2L L5 Diesel Engine
2016 Ford Ranger 2.2L L4 Diesel Engine
2015 Mazda BT50 3.2L L5 Diesel Engine
2015 Mazda BT50 2.2L L4 Diesel Engine
2015 Ford Ranger 3.2L L5 Diesel Engine
2015 Ford Ranger 2.5L L4 Fuel Injection
2015 Ford Ranger 2.2L L4 Diesel Engine
2014 Mazda BT50 3.2L L5 Diesel Engine
2014 Mazda BT50 2.2L L4 Diesel Engine
2014 Ford Ranger 3.2L L5 Diesel Engine
2014 Ford Ranger 2.5L L4 Fuel Injection
2014 Ford Ranger 2.2L L4 Diesel Engine
2013 Mazda BT50 3.2L L5 Diesel Engine
2013 Mazda BT50 2.2L L4 Diesel Engine
2013 Ford Ranger 3.2L L5 Diesel Engine
2013 Ford Ranger 2.5L L4 Fuel Injection
2013 Ford Ranger 2.2L L4 Diesel Engine
2012 Mazda BT50 3.2L L5 Diesel Engine
2012 Mazda BT50 2.2L L4 Diesel Engine
2012 Ford Ranger 3.2L L5 Diesel Engine
2012 Ford Ranger 2.5L L4 Fuel Injection
2012 Ford Ranger 2.2L L4 Diesel Engine
2011 Ford Ranger 3.2L L5 Diesel Engine
2011 Ford Ranger 2.2L L4 Diesel Engine

K&N replacement air filter E-0662 serves as a replacement for the disposable Ford air filter, number 1720719.

Use the Search By Vehicle tool on KNFilters.com to find additional performance parts and replacement filters for vehicles worldwide. Use the K&N Dealer Search function to find an authorized K&N dealer in almost any part of the world.

By replacing the stock hosing & enclosed air box of 2014-2016 Jeep Cherokee 3.2L models a K&N air intake is able to improve performance

The Jeep Cherokee model has a long history in the Jeep lineup. First produced in 1974 by the American Motors Corporation (AMC), the term “Sport Utility” first appeared in the 1974 Jeep Cherokee SJ sales brochure. Later on the Jeep XJ Cherokee began the modern sport utility vehicle trend spawning copycat models such as the Ford Explorer. The Jeep Liberty KJ was introduced in 2001 as a replacement for the Cherokee, however, outside of North America the Liberty was known as a Jeep Cherokee KJ. Jeep discontinued the Liberty and resurrected the Cherokee in the United States with the introduction of the 2014 Jeep Cherokee KL crossover SUV.

K&N reusable air filter RF-1048 is included with the 2014-2016 Jeep Cherokee 3.2L intake for superior airflow and superior performance

The 2014, 2015 and 2016 Jeep Cherokee KL can be equipped with either the standard 2.4-liter Tigershark I4, or a smaller version of Chrysler’s corporate engine the 3.2L Pentastar V6 engine. 2014, 2015 and 2016 Jeep Cherokee KL owners who opted for the EPA estimated 29 MPG and 271 horsepower FlexFuel V6 can easily outfit their Jeep crossover SUV with the superior airflow and superior performance associated with a K&N Aircharger air intake system. Typically, the factory air intake tubing, stock air filter box, and disposable air filter is a significant point of restriction in modern fuel injected cars or trucks. Because of this fact, K&N has developed an Aircharger air intake system for the 2014, 2015 and 2016 Jeep Cherokee 3.2L V6 designed to free up horsepower by eliminating these restrictive factory components.

The 2014-2016 Jeep Cherokee 3.2L K&N intake includes an application specific air filter heat shield to help keep inlet air temperatures within factory tolerances

By replacing the stock accordion hosing & enclosed air box of 2014-2016 Jeep Cherokee 3.2L models with a roto-molded HDPE air intake tube coupled to an open element K&N reusable air filter, K&N air intake system 63-1569 is able to provide an estimated additional 7.53 horsepower and 4.58 lb-ft of torque. Additionally, the K&N reusable air filter RF-1048 included with the 2014-2016 Jeep Cherokee 3.2L intake is protected by an application specific air filter heat shield to help keep inlet air temperatures (IAT) within factory tolerances. For Cherokee owners who take their 2014, 2015 or 2016 KL off-road, K&N offers a water repellant Drycharger^® air filter wrap, number RF-1048DK, to extend service intervals.

K&N air intake system, number 63-1569, was able to provide a 2014 Jeep Cherokee 3.2L with an estimated additional 7.53 HP and 4.58 lb-ft of torque

K&N backs its air filters and air intake systems with a 10-year/million mile limited warranty so Cherokee owners can rest assured that their intake system can withstand a trip to Moab, Utah or a trip to the grocery store. Whether 2014-2016 Jeep Cherokee KL owners use their crossover SUV as a fuel efficient grocery getter, or for conquering a rugged trail, the K&N 63-1569 Aircharger Air Intake system will provide increased performance with better engine sound for years to come.

K&N performance air intake system 63-1569 is guaranteed to increase horsepower and torque on the Jeep Cherokee models listed below:

2016 Jeep Cherokee 3.2L V6
2015 Jeep Cherokee 3.2L V6
2014 Jeep Cherokee 3.2L V6

Find additional Jeep Cherokee performance upgrades, such as Jeep Cherokee Air Filters, or performance parts for another vehicle, using the search by vehicle tool on KNFilters.com. To find a dealer near you, please use the K&N Dealer Search function.