The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
It’s easy to think of a Corvette V8 when you think of the 2006, 2007 and 2008 Chevrolet Trailblazer. The SUV packs a Corvette-derived 6.0 liter V8 that can handle a zero-to-sixty acceleration in 5.7 seconds. Take a look at our 57-3061 features video to see dyno testing in progress.
K&N Engineering 57-3061 for 2006, 2007 and 2008 Chevrolet Trailblazer with a 6.0 liter V8 engine
K&N Engineering has developed a performance air intake system (57-3061) that is street legal in 50 states for the 2006, 2007 and 2008 Chevrolet Trailblazer 6.0 liter V8 engine. K&N dynamometer testing shows a 19.18 horsepower gain at 5330 rpm.
Chevrolet Trailblazer with K&N air intake 57-3061 installed
Dyno chart for 2006 Chevrolet Trailblazer SS 6.0 liter engine
K&N was able to get the additional horsepower by replacing the restrictive original factory air box with an aerodynamic designed air intake. The design of the intake's heat shield directs cooler outside air toward the K&N chrome top air filter (RF-1032). This specially designed heat shield isolates the K&N air filter from the engine heat. The air intake fits into the engine compartment using factory holes and mounting points.
The high flow technology invented by K&N and made in the USA provides the best balance of airflow and filtration. The RF-1032 is also washable and reusable and can go up to 100,000 miles before cleaning is necessary.
The 57-3061 can be easily installed in 90 minutes or less and is backed by the K&N Million Mile Limited Warranty. Take a look at our 57-3061 installation video to see all the steps involved.
K&N 57-3061 air intake system fits the following Trailblazers:
2008 Chevrolet Trailblazer 6.0L V8
2007 Chevrolet Trailblazer 6.0L V8
2006 Chevrolet Trailblazer 6.0L V8
GM diesel and Chevrolet Silverado diesel trucks get top honors in the full-size heavy-duty pickup segment of the automotive industry. They have immense hauling and towing capacity and offer a quiet comfortable ride.
K&N's 57-3000 air intake system for GM diesel and Silverado diesel heavy duty trucks
K&N Engineering has designed a performance air intake system (57-3000) that is street legal in 50 states for the 2005, 2006 and 2007 Chevrolet Silverado diesel engines and the 2005, 2006 and the 2005, 2006 and 2007 GMC Sierra diesel engines. See the complete applications list below.
57-3000 K&N air intake system installed in 2006 Chevrolet 2500HD
Dyno chart for 2006 Chevrolet 2500HD 6.6 liter V8 diesel engine with K&N air intake system
K&N dynamometer tests show a 15.42 horsepower gain at 2911 RPM with the
57-3000. This air intake system has a lid that goes on top of the heat shield and includes a full air box.
The K&N air intake system filters harmful dirt and debris from entering the engines of these diesel work trucks. The heat shield isolates the K&N air filter (RC-5139) from the engine heat. This in turn keeps a cooler air charge going into the engine for an instant power gain. No other modifications are necessary.
The high flow technology invented by K&N and made in the USA provides the best balance of airflow and filtration. The
RC-5139 is also washable and reusable and can go up to 100,000 miles before cleaning is necessary.
The 57-3000 K&N air intake system can be easily
installed in 90 minutes or less with simple hand tools. The K&N air intake system is backed by the K&N Million Mile Limited Warranty.
Applications are as follows:
2007 GMC SIERRA 3500 CLASSIC 6.6L V8 Diesel
2007 GMC SIERRA 2500 HD CLASSIC 6.6L V8 Diesel
2007 CHEVROLET SILVERADO 3500 CLASSIC 6.6L V8 Diesel
2007 CHEVROLET SILVERADO 2500 HD CLASSIC 6.6L V8 Diesel
2006 GMC SIERRA 3500 6.6L V8 Diesel
2006 GMC SIERRA 2500 HD 6.6L V8 Diesel
2006 CHEVROLET SILVERADO 3500 6.6L V8 Diesel
2006 CHEVROLET SILVERADO 2500 HD 6.6L V8 Diesel
2005 GMC SIERRA 3500 6.6L V8 Diesel with Round Filter
2005 GMC SIERRA 2500 HD 6.6L V8 Diesel with Round Filter
2005 CHEVROLET SILVERADO 3500 6.6L V8 Diesel with Round Filter
2005 CHEVROLET SILVERADO 2500 HD 6.6L V8 Diesel with Round Filter
The Chrysler PT Cruiser is known for its retro styling and spacious interior. Handling and steering are good and its ride is smooth.
K&N Engineering 57-1550 for 2006 through 2010 Chrysler PT Cruiser with a non-turbo engine
K&N Engineering has developed a performance air intake system (57-1550) that is street legal in 50 states for the 2006 through 2010 Chrysler PT Cruiser with 2.4 liter non turbo engine. K&N dynamometer testing shows a 7.17 horsepower gain at 5004 rpm.
Chrysler PT Cruiser with K&N air intake 57-1550 installed
Dyno chart for 2007 Chrysler PT Cruiser with a 2.4 liter non-turbo engine
The 57-1550 features a specially molded intake tube and a large K&N air filter. The air filter, RP-4660, fits into the stock location. Cooler outside air is directed toward the K&N air filter from the factory fresh air duct.
K&N developed a new heat shield for this particular engine and designed the tube to accommodate front wheel drive and the transmission. The electronic components under the hood were repositioned with the new design of the PT cruiser. The heat shield isolates the K&N air filter from the engine heat. This in turn keeps a cooler air charge going into the engine for an instant power gain.
The high flow technology invented by K&N and made in the USA provides the best balance of airflow and filtration. The RP-4660 is also washable and reusable and can go up to 100,000 miles before cleaning is necessary.
The 57-1550 can be easily installed in 90 minutes or less and is backed by the K&N Million Mile Limited Warranty.
The Dodge Nitro is a midsize SUV that is known for its bold looks and roomy cargo. It has an independent front and solid rear suspension system for a firm ride.
K&N's 57-1554 air intake system for Dodge Nitro 3.7 liter V6 engine
2007 Dodge Nitro
K&N Engineering has developed a performance air intake system (57-1554) that is street legal in 50 states for the 2007 and 2008 Dodge Nitro 3.7 liter V8 engine. K&N dynamometer testing shows an estimated 11.7 horsepower gain at 4260 rpm.
57-1554 K&N air intake system installed in 2007 Dodge Nitro
Dyno chart displays hp gain for 2007 Dodge Nitro with K&N air intake system
The 57-1554 features a specially molded intake tube and a large open element chrome top K&N air filter. The air filter,
RF-1041, rests behind a powder coated steel heat shield. This helps isolate it from the rest of the engine compartment. Cooler outside air is directed toward the K&N air filter from the factory fresh air duct. A steady supply of unrestricted airflow reaches the Nitro’s engine for an instant performance gain. No other modifications are necessary.
The high flow technology invented by K&N and made in the USA provides the best balance of airflow and filtration. The
RF-1041 is also washable and reusable and can go up to 100,000 miles before cleaning is necessary.
The 57-1554 K&N air intake system can be easily installed in 90 minutes or less with a socket set, flat blade screwdriver and a 10mm wrench. The K&N air intake system is backed by the K&N Million Mile Limited Warranty.
The Jeep Grand Cherokee and Jeep Commander set the standard for a comfortable SUV with easy handling. As a midsize SUV it offers a mix of car and truck type construction.
K&N air intake kit for Jeep Grand Cherokee and Jeep Commander
2007 Jeep Grand Cherokee
K&N Engineering has released a new air intake system, part number 57-1549 for the 2005, 2006 and 2007 Jeep Grand Cherokee 5.7 liter V8 engine and the 2006 and 2007 Jeep Commander 5.7 liter V8 engine.
K&N dynamometer tests show an estimated 15.30 horsepower gain @ 5046 RPM. The chrome top K&N air filter
(RF-1048) sits behind a powder coated steel heat shield which helps isolate it from the rest of the engine compartment. This combination allows for a steady supply of unrestricted airflow to reach the Jeep's engine providing an instant performance gain with no other modifications necessary.
Power Gain Chart for Jeep Grand Cherokee with K&N Air Intake
K&N's air intake design provides excellent air filtration and lower restriction
than the factory air box system. The heat shield assembly is installed into the engine bay using factory mounting points. The heat shield isolates the K&N air filter from the hotter temperatures around the engine and allows it to receive a consistent flow of fresh cooler air.
The chrome top of the large RF-1048 air filter stops dust and dirt by using multiple layers of cotton and 1.45 oz, of K&N filter oil. This high flow technology invented by K&N provides the best balance of airflow and filtration. Washable and reusable K&N air intake filters can go up to 100,000 miles before cleaning is required.
The 57-1549 can be easily installed in 90 minutes or less and is backed by the
K&N Million Mile Limited Warranty. This intake is street legal in 50 states for the applications mentioned in this story.
The K&N 57-1549 air instake system fits the following Jeeps:
2010 Jeep Grand Cherokee 5.7L V8
2010 Jeep Commander 5.7L V8
2009 Jeep Grand Cherokee 5.7L V8
2009 Jeep Commander 5.7L V8
2008 Jeep Grand Cherokee 5.7L V8
2008 Jeep Commander 5.7L V8
2007 Jeep Grand Cherokee III 5.7L V8
2007 Jeep Grand Cherokee 5.7L V8
2007 Jeep Commander 5.7L V8
2006 Jeep Grand Cherokee III 5.7L V8
2006 Jeep Grand Cherokee 5.7L V8
2006 Jeep Commander 5.7L V8
2005 Jeep Grand Cherokee III 5.7L V8
2005 Jeep Grand Cherokee 5.7L V8
