The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
K&N Engineering has developed a drop-in panel replacement air filter (33-2925) for the Renault Clio III, Twingo & Modus. This filter is designed to increase horsepower and acceleration while providing excellent filtration. Unlike disposable filters, K&N Filters are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.
This filter (33-2925) is a direct replacement for your stock air filter. This means that adding performance is simple. No modifications to your stock air cleaner system will be required. Installation is as simple as removing the old disposable air filter and dropping in the new K&N Replacement Filter. K&N Filters are the finest air filters that money can buy. With proper care, this filter will last 1 million miles or more. Cleaning is a breeze with K&N's easy to use and easy to follow Recharge kit (99-5050).
You would probably be surprised by the amount of air filtration testing and scientific research that goes on in K&N facilities as well as in independent laboratories. As the leader and originator of the high flow performance air filter we are always looking for new ways to provide excellent protection and maximum power for your car, and just about anything else with an engine.
Vehicle applications for the 33-2925 are as follows:
2017 RENAULT CLIO IV 1.2L L4 F/I - Exc. Turbo
2017 DACIA SANDERO 1.2L L4 F/I
2017 DACIA LOGAN 1.2L L4 F/I
2016 RENAULT CLIO IV 1.2L L4 F/I - Exc. Turbo
2016 DACIA SANDERO 1.2L L4 F/I
2016 DACIA LOGAN 1.2L L4 F/I
2015 RENAULT CLIO IV 1.2L L4 F/I - Exc. Turbo
2015 DACIA SANDERO 1.2L L4 F/I
2015 DACIA LOGAN 1.2L L4 F/I
2014 RENAULT TWINGO 1.2L L4 F/I - Exc. Turbo
2014 RENAULT CLIO IV 1.2L L4 F/I - Exc. Turbo
2014 DACIA SANDERO 1.2L L4 F/I
2014 DACIA LOGAN 1.2L L4 F/I
2013 RENAULT TWINGO 1.2L L4 F/I - Exc. Turbo
2013 RENAULT MODUS 1.2L L4 F/I
2013 RENAULT CLIO IV 1.2L L4 F/I - Exc. Turbo
2013 DACIA SANDERO 1.2L L4 F/I
2013 DACIA LOGAN 1.2L L4 F/I
2012 RENAULT TWINGO 1.2L L4 F/I - exc. Turbo
2012 RENAULT MODUS 1.2L L4 F/I
2012 RENAULT CLIO III 1.2L L4 F/I - exc. Turbo
2012 DACIA SANDERO 1.2L L4 F/I
2011 RENAULT TWINGO 1.2L L4 F/I - 16v
2011 RENAULT MODUS 1.2L L4 F/I
2011 RENAULT CLIO III 1.2L L4 F/I - exc. Turbo
2011 DACIA SANDERO 1.2L L4 F/I
2010 RENAULT TWINGO 1.2L L4 F/I - 16v
2010 RENAULT MODUS 1.2L L4 F/I
2010 RENAULT CLIO III 1.2L L4 F/I - exc. Turbo
2010 DACIA SANDERO 1.2L L4 F/I
2009 RENAULT TWINGO 1.2L L4 F/I - 16v
2009 RENAULT MODUS 1.2L L4 F/I
2009 RENAULT CLIO III 1.2L L4 F/I - Exc., 101BHP
2009 DACIA SANDERO 1.2L L4 F/I
2008 RENAULT TWINGO 1.2L L4 F/I - 16v
2008 RENAULT MODUS 1.2L L4 F/I
2008 RENAULT CLIO III 1.2L L4 F/I - Exc., 101BHP
2007 RENAULT TWINGO 1.2L L4 F/I - 16v
2007 RENAULT MODUS 1.2L L4 F/I
2007 RENAULT CLIO III 1.2L L4 F/I - Exc., 101BHP
2006 RENAULT TWINGO 1.2L L4 F/I - 60BHP
2006 RENAULT MODUS 1.2L L4 F/I
2006 RENAULT CLIO III 1.2L L4 F/I
2005 RENAULT TWINGO 1.2L L4 F/I - 60BHP
2005 RENAULT MODUS 1.2L L4 F/I
2005 RENAULT CLIO III 1.2L L4 F/I
2004 RENAULT TWINGO 1.2L L4 F/I - 60BHP
2004 RENAULT MODUS 1.2L L4 F/I
On Saturday, September 15, Travis Kvapil will make his fifth NASCAR Craftsman
Truck Series Start at New Hampshire International Speedway in the No. 6 K&N
Filter Ford F-150.
Travis Kvapil Third in NASCAR Craftsman Truck Series Points
Kvapil is third in NASCAR Craftsman Truck Series points, 194 markers
behind point leader Ron Hornaday. The 200 lap, 211.6 mile race begins at 3:00 pm
EST and will be covered by SPEED-TV.
K&N Filters Ford F-150 Chassis RK330-45
Travis Kvapil and K&N Filters Crew Ready for New Hampshire
“New Hampshire is very similar to Milwaukee, a flat one-mile racetrack,” said Kvapil. “We feel like we’ll be able to take some of what worked for us there and
apply it to this race. I won here a few years ago in the truck series, so it’s a
place I’ve got of lot of confidence heading back to. It’s another one of the
tracks where the fans really take us in, so that is another thing we are really
looking forward to.”
“Any time we head to a racetrack where we’ve won or Travis has won, it gives us
a little extra confidence,” said Crew Chief Mike Beam. “Travis won here back in
2004, and we ran well in this race last year despite some problems on the track
and on pit road. We ran well at Milwaukee earlier in the year, but not as well
as we would have liked. We fell like we can build off what we accomplished there
and get a good result this weekend at New Hampshire.”
The No.6 K&N Filters team will be bringing chassis RK330-45 to New Hampshire.
This chassis last raced at
Bristol, where Kvapil started first and finished
11th. This will be race 18 of 25 in the NASCAR Craftsman Truck Series.
Follow Travis Kvapil in the No. 6 K&N Filters Ford F-150 throughout the racing season at the
K&N Blog. Find K&N products for your vehicle using the K&N application search then use the
K&N
dealer search to find a K&N dealer in your part of the world.
Defending World of Outlaws champion and current points leader Donny Schatz put
on a dominant performance at Clay County Fairgrounds in Spencer, Iowa. “Winning
races is what we try to do every night,” said Schatz. “It feels good to be back
in victory lane again.”
Donny Schatz
Returns to Victory Lane
The Fargo, North Dakota resident took the checkered flag 3.93 seconds
ahead of runner-up Joey Saldana. “For most of the year we were on the podium
nearly every night,” said Schatz, who has 41 top 5 finishes in 64 World of
Outlaw starts in 2007. “This is the kind of night we’re shooting for from here
on out. We qualified decent, got in the dash and kept getting the car better.”
Defending World of Outlaws Champion Schatz uses K&N
Schatz qualified fifth in his Global ParkerStore sponsored No. 15 with K&N
products on the newly configured 3/8 mile dirt oval. In the first heat race
Schatz made a strong surge in the field of 32 cars. He started third, but had to
pass fast qualifier Jason Solwold to earn his spot in the Crane Cams Dash. The
Pakerstore Team drew the seventh starting position in the six-lap race, which
set the first ten spots in the 30-lap feature.
Schatz avoided disaster early in the dash and earned the outside third row
starting position. In the feature he worked his way forward and jumped into
fourth on the opening lap.
He quickly began chasing leaders Tim Shaffer and Saldana. As the two leaders
entered thick traffic, Schatz waited for the perfect moment to take advantage of
the situation. On lap 11 the leaders went three wide and Schatz took the lead.
He led lap 12 and paced the field during the final 18 laps to collect his 66th
career A-Feature World of Outlaws win.
Schatz and the ParkerStore Team use K&N Engineering products. “Our race team
does extensive research and works closely with our product suppliers,” said
Schatz. “We’ve seen the results of the K&N performance both on the track and in
our research and development. We’ve had the complete car on a chassis
dynamometer and seen results from the engine dynamometer. The K&N Filters Carbon
Sprint Airbox is simply the best product out there for us. It fits perfectly and
provides the most airflow to the engine.”
Schatz and the ParkerStore Team will continue their swing in the Midwest with a
race at Heartland Raceway Park in Topeka, Kansas on Friday night.
Follow Donny Schatz throughout the racing season at the
K&N news site. Find K&N products for your vehicle using the K&N application search then use the
K&N
dealer search to find a K&N dealer in your part of the world.
The 2007 Toyota Camry is the sixth generation Camry. The conservative style did not
change in 2007, but the new design is fresher and younger. There are smaller
windows and headlights that have gone horizontal.
Air Intake for Toyota Camry
K&N Engineering manufactures a textured black High-Flow Air Intake System
(69-8610TTK)
for the 2007, 2008 and 2009 Toyota 2.4 liter Camry.
Air Intake Installed in Toyota Camry
Power Gain Chart for Toyota Camry with K&N Air Intake
K&N dynamometer testing showed this small 2.4L engine gains an estimated 14.2 horsepower @ 5639 RPMs. K&N High-Flow Air Intake Systems provide a measured increase in horsepower while providing excellent air filtration. Our thoroughly
engineered air intake systems provide huge increases in power that our customers can feel
when they accelerate.
K&N Engineers protect the K&N High-Flow Air Filter (RU-4990)
from engine heat by isolating it with a heat shield. The large K&N Air Filter
provides increased surface area and dust capacity. Our air intake
system has lower restriction than the factory air box system which results in
additional power from the engine.
The
69-8610TTK is designed so the mass air sensor will work with the factory
stock settings. This means there is no need for re-programming to run our air
intake system.
Our High Flow Air Intake Systems are backed by the K&N Million Mile Limited
Warranty and can be easily
installed in 90
minutes or less with simple hand tools.
Opel designed the Corsa to be one of the safest superminis in its class, with
air bags all around. The Vauxhall Corsa is Opel's latest 1.6 liter engine which
pumps out 180 bhp and is compliant with Euro emissions rules.
Air Intake for Vauxhall and Opel Corsa D and Fiat Grand Punto
K&N Engineering manufactures a 57i Air Induction System (57-0667) for the 2007, 2008, 2009, 2010, 2011, 2012 and 2014 Vauxhall Corsa D 1.6 liter engine, 2007 to 2012 Opel Corsa D 1.6 liter engine and the 2006, 2007 and 2006 through 2010 Fiat Grand Punto models with the 1.9 liter engine.
These models are mainly found outside the United States. The K&N induction system is designed to fit these specific vehicles.
Simply remove the stock air box and install the molded plastic tube with the
oversized K&N Air Filter for added performance.
The adaptor fits onto the K&N Air Filter. It is connected to a stabilizing
housing bracket which is designed to keep the K&N Air Filter in place. The cold
air inlet delivers cold air directly to the K&N Air Filter.
It should take 90 minutes or less to install this K&N Air Induction System with
standard hand tools.
